6 comments

Direct Access: Windows Internal Database (SQL) High CPU Usage

Published on Wednesday, October 14, 2015 in ,

[Update 2016/03/15] An official article has been released with proper guidance and no need for any SQL management tools at all. It’s available here: https://technet.microsoft.com/en-us/library/mt693376.aspx

I’ve got a customer who has deployed Direct Access quite a while ago. Something which we have observed for a while now is that the CPU usage of the servers is rather high. Some details about our setup: we got 2 Direct Access servers which are load balanced using Windows NLB. They are running Windows 2012 R2, have 4 vCPU’s and 8 GB of RAM. When troubleshooting this issue, we were seeing 400 active users, roughly 200 for each server. Here’s what the CPU usage looked like:

image001

As you can see sqlservr.exe is using 67% CPU. Now that’s quite a lot… I would hope a DA server had other things to do with it’s CPU instead of running an SQL instance. Now I know where this instance comes from. We configured inbox accounting on the Direct Access servers. This allows an administrator to pull up reports about who connected when to what resources. You can choose between Radius and Windows Internal Database (WID) for the auditing data targets. We choose the WID approach. We configured our accounting to hold data for 3 months. So I started wondering, is the SQL database instance having troubles with the amount of data? Or is there an issue with indexes that are fragmented or… In order to investigate this, we’d had to do some SQL talking to this instance. As it’s a WID instance, we can only talk to it from the box itself. So we can either install the SQL commandline tools or the SQL Management Studio. I’m not an SQL guru, so I prefer to do my troubleshooting using the SQL Management Studio. In order to determine what version you can use you can check the location for the sqlservr.exe binary:

image003

And from the details you can see that a WID on a Windows 2012 R2 is actually build 11.0.2100.60 which, if bing is correct, is a SQL 2012 edition.

image005

So I took the SQL 2012 iso and installed the SQL Management Studio on the DA servers. Watch out when going through the setup, we don’t want to install another SQL instance! Just the management tools. Here’s the string we can use to connect to the instance: \\.\pipe\MICROSOFT##WID\tsql\query

image007

After connecting to the instance we see that there’s only one Database (RaAcctDb) which has 4 tables. This query I found here: TechNet Gallery and also resembles the query that is presented here: KB2755960. To check all indexes for fragmentation issues, execute the following query:

SELECT OBJECT_NAME(ind.OBJECT_ID) AS TableName,

ind.name AS IndexName, indexstats.index_type_desc AS IndexType,

indexstats.avg_fragmentation_in_percent

FROM sys.dm_db_index_physical_stats(DB_ID(), NULL, NULL, NULL, NULL) indexstats

INNER JOIN sys.indexes ind

ON ind.object_id = indexstats.object_id

AND ind.index_id = indexstats.index_id

WHERE indexstats.avg_fragmentation_in_percent > 30

ORDER BY indexstats.avg_fragmentation_in_percent DESC

No indexes were returned. Another thing which I hear from time to time is rebuild “statistics”. So I checked them and I saw they were two weeks old. I figured rebuilding them couldn’t hurt:

 

use RaAcctDb;

UPDATE STATISTICS connectionTable

WITH FULLSCAN

GO

 

use RaAcctDb;

UPDATE STATISTICS EndpointsAccessedTable

WITH FULLSCAN

GO

 

use RaAcctDb;

UPDATE STATISTICS ServerEndpointTable

WITH FULLSCAN

GO

 

use RaAcctDb;

UPDATE STATISTICS SessionTable

WITH FULLSCAN

GO

Again no real change in CPU usage… Ok, back to the drawing board.  I googled a bit for “high cpu usage SQL” and I found the following blog: http://mssqlfun.com/2013/04/01/dmv-3-what-is-currently-going-on-sys-dm_exec_requests-2/ One of the queries there is this one:

 

SELECT

R.SESSION_ID,

R.REQUEST_ID AS SESSION_REQUEST_ID,

R.STATUS,

S.HOST_NAME,

C.CLIENT_NET_ADDRESS,

CASE WHEN S.LOGIN_NAME = S.ORIGINAL_LOGIN_NAME THEN S.LOGIN_NAME ELSE S.LOGIN_NAME + '(' + S.ORIGINAL_LOGIN_NAME + ')' END AS LOGIN_NAME,

S.PROGRAM_NAME,

DB_NAME(R.DATABASE_ID) AS DATABASE_NAME,

R.COMMAND,

ST.TEXT AS QUERY_TEXT,

QP.QUERY_PLAN AS XML_QUERY_PLAN,

R.WAIT_TYPE AS CURRENT_WAIT_TYPE,

R.LAST_WAIT_TYPE,

R.BLOCKING_SESSION_ID,

R.ROW_COUNT,

R.GRANTED_QUERY_MEMORY,

R.OPEN_TRANSACTION_COUNT,

R.USER_ID,

R.PERCENT_COMPLETE,

CASE R.TRANSACTION_ISOLATION_LEVEL

WHEN 0 THEN 'UNSPECIFIED'

WHEN 1 THEN 'READUNCOMITTED'

WHEN 2 THEN 'READCOMMITTED'

WHEN 3 THEN 'REPEATABLE'

WHEN 4 THEN 'SERIALIZABLE'

WHEN 5 THEN 'SNAPSHOT'

ELSE CAST(R.TRANSACTION_ISOLATION_LEVEL AS VARCHAR(32))

END AS TRANSACTION_ISOLATION_LEVEL_NAME

FROM

SYS.DM_EXEC_REQUESTS R

LEFT OUTER JOIN SYS.DM_EXEC_SESSIONS S ON S.SESSION_ID = R.SESSION_ID

LEFT OUTER JOIN SYS.DM_EXEC_CONNECTIONS C ON C.CONNECTION_ID = R.CONNECTION_ID

CROSS APPLY SYS.DM_EXEC_SQL_TEXT(R.SQL_HANDLE) ST

CROSS APPLY SYS.DM_EXEC_QUERY_PLAN(R.PLAN_HANDLE) QP

WHERE

R.STATUS NOT IN ('BACKGROUND','SLEEPING')

The result:

image009

It returns one ore more queries the SQL instance is currently working on. It’s actually pretty easy and very powerful. The first record is a sample entry we care about. The others are me interacting with the SQL management studio. Scroll to the right and you’ll see both the execution plan and the actual query. Now how cool is that?!

image011

There we can get the query being executed (QUERY_TEXT)

CREATE PROCEDURE raacct_InsertSession (

            @Hostname NVARCHAR(256),

            @ClientIPv4Address BINARY(4),

            @ClientIPv6Address BINARY(16),

            @ClientISPAddressType SMALLINT,

            @ClientISPAddress VARBINARY(16),

            @ConnectionType TINYINT,

            @TransitionTechnology INT,

            @TunnelType INT,

            @SessionHandle BIGINT,

            @Username NVARCHAR(256),

            @SessionStartTime BIGINT,

            @AuthMethod INT,

            @HealthStatus INT) AS

BEGIN

    DECLARE @SessionId BIGINT

    DECLARE @ConnectionId BIGINT

    DECLARE @NumActiveSessions SMALLINT

    IF (@SessionHandle IS NULL OR @SessionHandle = 0)

    BEGIN

        -- error (BAD PARAMETER)

        RETURN (1)

    END

    IF (@SessionStartTime IS NULL OR @SessionStartTime = 0)

    BEGIN

        -- error (BAD PARAMETER)

        RETURN (1)

    END

    SELECT @SessionId = 0

    BEGIN TRANSACTION

    SELECT @SessionId = [SessionId]

    FROM [dbo].[SessionTable]

    WHERE    @SessionHandle = [SessionHandle]

        AND @SessionStartTime = [SessionStartTime]

 

    IF (@@ROWCOUNT > 0)

    BEGIN

        -- error (session already exists)

        ROLLBACK TRANSACTION

        RETURN (2)

    END

    -- check if connection exists

    SELECT @ConnectionId = connTbl.[ConnectionId]

    FROM [dbo].[ConnectionTable] AS connTbl, [dbo].[SessionTable] AS sessTbl

    WHERE sessTbl.SessionState = 1

      AND connTbl.ConnectionId = sessTbl.ConnectionId

      AND connTbl.Hostname = @Hostname

      AND connTbl.ClientIPv4Address = @ClientIPv4Address

      AND connTbl.ClientIPv6Address = @ClientIPv6Address

      AND connTbl.ClientISPAddressType = @ClientISPAddressType

      AND connTbl.ClientISPAddress = @ClientISPAddress

      AND connTbl.ConnectionType = @ConnectionType

      AND connTbl.TransitionTechnology = @TransitionTechnology

      AND connTbl.TunnelType = @TunnelType

    IF @@ROWCOUNT = 0

    BEGIN

        -- create connection record

        INSERT INTO [dbo].[ConnectionTable] ([Hostname],

                [ClientIPv4Address],

                [ClientIPv6Address],

                [ClientISPAddressType],

                [ClientISPAddress],

                [ConnectionType],

                [TransitionTechnology],

                [TunnelType]

                )

            VALUES (@Hostname,

            @ClientIPv4Address,

            @ClientIPv6Address,

            @ClientISPAddressType,

            @ClientISPAddress,

            @ConnectionType,

            @TransitionTechnology,

            @TunnelType

            )

        IF @@ERROR <> 0

        BEGIN

            -- error (failed to create connection), return from here

            ROLLBACK TRANSACTION

            RETURN (99)

        END

        SET @ConnectionId = @@IDENTITY

    END

    SELECT @NumActiveSessions = COUNT(SessionHandle)

    FROM [dbo].[SessionTable]

    WHERE   [SessionState] = 1

    SET @NumActiveSessions = @NumActiveSessions + 1

    INSERT INTO [dbo].[SessionTable] ([ConnectionId],

                [SessionHandle],

                [Username],

                [SessionStartTime],

                [AuthMethod],

                [HealthStatus],

                        [NumConcurrentConnections]

                )

        VALUES (@ConnectionId,

            @SessionHandle,

            @Username,

                  @SessionStartTime,

            @AuthMethod,

            @HealthStatus,

            @NumActiveSessions

        )

    IF @@ERROR <> 0

    BEGIN

        ROLLBACK TRANSACTION

        RETURN (4)

    END

    COMMIT TRANSACTION

END

 

The only thing I can see, with my limited SQL knowledge, is that potentially performance hits might occur on the where statements:

 

FROM [dbo].[SessionTable]

    WHERE    @SessionHandle = [SessionHandle]

        AND @SessionStartTime = [SessionStartTime]

And

FROM [dbo].[ConnectionTable] AS connTbl, [dbo].[SessionTable] AS sessTbl

    WHERE sessTbl.SessionState = 1

      AND connTbl.ConnectionId = sessTbl.ConnectionId

      AND connTbl.Hostname = @Hostname

      AND connTbl.ClientIPv4Address = @ClientIPv4Address

      AND connTbl.ClientIPv6Address = @ClientIPv6Address

      AND connTbl.ClientISPAddressType = @ClientISPAddressType

      AND connTbl.ClientISPAddress = @ClientISPAddress

      AND connTbl.ConnectionType = @ConnectionType

      AND connTbl.TransitionTechnology = @TransitionTechnology

      AND connTbl.TunnelType = @TunnelType

The where statements act as filters and columns they use are often indexed. Without an index the SQL server would have to scan the complete table looking for the records. Now on smaller tables that’s not an issue but the SessionTable table contains 14.482.972 records!

image013

So if we check the indexes for that table, one would hope SessionHandle, SessionStartTime and SessionState to be present:

image015

The last one UQ_SessionT… seems to have both SessionHandle and SessionStartTime in it. So I guess that should satisfy the first where statement:

image017

Now what about SessionState? I can’t seem to find that one… Now back to our query that showed us the query being executed. There’s also an XML_QUERY_PLAN. It’s clickable in the Management Studio:

image019

See how this query cost shows 50%? Further down there’s another Query that shows the other 50%. Both show “missing index”:

image021

As previously stated, I’m not an experienced SQL engineer/DBA. I try to crosscheck stuff I find online before applying it. Also I wouldn’t do this kind of stuff on a FIM Service or SCCM database. Those are pretty complex databases. But I made a personal assessment and the Direct Access auditing database seems simple enough to tinker with it. So I decided to give it a try and create the index. Undoing this is pretty straightforward, so I guess there’s no real harm in going forward. Right-click one of the existing indexes and choose Script Index as > CREATE To > New Query Editor Window

image023

Simply change both the Index name and the column to “SessionState”. And execute the query. After refreshing the UI you can see the index:

image025

And there goes the CPU usage:

image027

Conclusion: to me it looks like the DA team just forgot this particular index. From the other indexes you can tell they actually did something for those. I’m not really sure why we didn’t just log a case with Microsoft. Partially I guess because we were afraid/guessing we’d get the answer: by design with that amount of auditing data. But after this troubleshooting session we can clearly see there’s shortcoming in the SQL database setup. As with most stuff you read on the internet: be careful when applying in your environment. If you do not know what commands/queries you’re executing, look them up and do some background reading.

Related Posts

6 Response to Direct Access: Windows Internal Database (SQL) High CPU Usage

Arto M
21 October, 2015 15:22

We've been facing the exactly same issue in similar environment, and with your instructions I was able to lower the cpu usage to normal level (and also learned new tricks about sql troubleshooting). Excellent article, thanks a million!

22 October, 2015 09:52

Thanks a lot for the feedback! Nice to know other people can benefit from this information :)

13 November, 2015 13:16

To avoid going through all text, here is the index you need to create.

create nonclustered index IX_SessionState1 on SessionTable (SessionState,ConnectionID)

If you are not allowed to install MSSQL Server Studio on the server, I Sugest you download the latest portable version of Heidi SQL (http://www.heidisql.com/download.php?download=portable) and run it from a network share.

You should see a dramatic effect the moment you deploy the index.

13 November, 2015 14:21

Thanks for the tip about HeidSQL.

I prefer to write the story as a whole. It means "a lot of text" but I hope people learn troubleshooting methods like this AND at the same time I justify my answer. I myself would hate to blindly execute commandos/fixes without any background I can validate :)

And indeed the effect is dramatic. It's really amazing how an index can mean so much.

Albert Hobbs
29 December, 2015 13:23

SQL server is one of the most flexible databases these days. People always focus for easily accessible and minimum coding programs. Use of functions, view and stored procedure makes the SQL server much better than others. Thanks for the direct access coding. It's just something useful to me. A small mistake in code writing may make it difficult in program execution. So, seeking for the support team is the best objective. IT Support Culver City. Keep sharing.

21 July, 2016 13:11

We raised a support call with MS about this and its been acknowledged as a supportable fix. They have authored a KB article following testing and applying the fix without the need of installing management studio on the DA server. See the article here. https://technet.microsoft.com/en-us/library/mt693376(v=ws.11).aspx

Add Your Comment